If you want to ensure that a particular application receives priority access to the network, you should configure what feature on the router? QoS

DHCP

UDP

ARP

Draw the hierarchy chart and design the logic for a program that calculates service charges for hazel's housecleaning service. the program contains housekeeping, detail loop, and end-of-job modules. the main program declares any needed global variables and constants and calls the other modules. the housekeeping module displays a prompt for and accepts a customer's last name. while the user does not enter for the name, the detail loop accepts the number of bathrooms and the number of other rooms to be cleaned. the service charge is computed as $40 plus $15 for each bathroom and $10 for each of the other rooms. the detail loop also displays the service charge and then prompts the user for the next customer's name. the end-of-job module, which executes after the user enters the sentinel value for the name, displays a message that indicates the program is complete.

The blank button automatically displays next to the data when you select a range of numeric data which is an available option for creating a chart

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?