Debug the program so it prints the factorial of a positive integer entered by the user. This is calculated by multiplying all the numbers from 1 up to that number together. For example, 5 factorial is 5*4*3*2*1 = 120. import java. util. Scanner;

public class U4_L1_5_Activity_Two{
public static void main(String[] args){

Scanner scan = new Scanner(System. in);
int num = scan. nextInt();
while(num >= 0){
int prod = 1;
num--;
prod = prod*num;
}
System. out. println(prod);

}
}

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a.if the manual switch s is on, then the light l is on. b.besides the manual switch, there is a motion detector, m1, which activatesthis light.c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d.the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to

What does the faves button do? a. users mark a web page as a favorite b. leads other readers to favor a specific page c. readers sort and align their favicons, or favorite icons d. leads users to a message board where they can post questions