Grading Quizzes Write a program that grades multiple-choice quizzes as follows: Ask the user how many questions are in the quiz. Ask the user to enter the key (that is, the correct answers). There should be one answer for each question in the quiz, and each answer should be a lower-case letter. They can be entered on a single line, e. g., abbacddc might be the key for a 10-question quiz. You will need to store the key in an array. Ask the user to enter the answers for the quiz to be graded. As for the key, these can be entered on a single line. Again there needs to be one for each question. Note that these answers do not need to be stored; each answer can simply be compared to the key as it is entered. When the user has entered all of the answers to be graded, print the number correct and the percent correct.

Given a link with a maximum transmission rate of 32.8 mbps. only two computers, x and y, wish to transmit starting at time t = 0 seconds. computer x sends filex (4 mib) and computer y sends filey (244 kib), both starting at time t = 0. statistical multiplexing is used, with details as follows packet payload size = 1000 bytes packet header size = 24 bytes (overhead) ignore processing and queueing delays assume partial packets (packets consisting of less than 1000 bytes of data) are padded so that they are the same size as full packets. assume continuous alternating-packet transmission. computer x gets the transmission medium first. at what time (t = ? ) would filey finish transmitting? give answer in milliseconds, without units, and round to one decimal places (e.g. for an answer of 0.013777 seconds you would enter "13.8" without the quotes)