Random access memory is tempory computer memory that stores works in progress

Suppose we have a byte addressable computer that has a 32-byte cache with 8 bytes per block. the memory address is 8 bits long. the system accesses memory addresses (in hex) in this exact order: 6e, b9, 17, e0, 4e, 4f, 50, 91, a8, ab, ad, 93, and 94. (a) assuming the cache is direct mapped, what memory addresses will be in cache block 2 after the last address has been accessed? (b) assuming the cache is direct mapped, what is the hit ratio for the entire memory reference sequence given, assuming the cache is initially empty? (c) assuming the cache is 2-way set associative with a lru replacement policy, what is the hit ratio?

Consider a slotted aloha system, where the time slot equals the fixed duration of each packet. assume that there are 4 stations a,b,c,d sharing the medium. (a) stations a,b,c,d receive one packet each from higher layers at times 1.3, 1.5, 2.6,5.7 respectively. show which transmissions take place when, according to the slottedaloha protocol; describe all transmissions until all four packets have been successful.when needed, each station has access to the following sequence of random number, provided by a random number generator and drawn uniformly between 0 and 1: (1) station a draws numbers: 0.31, 0.27, 0.78, 0.9, 0.9, 0.11, 0. (2) station b draws numbers: 0.45, 0.28, 0.11, 0.83, 0.37, 0.22, 0. (3)station c draws numbers: 0.1, 0.2, 0.3, 0.4, 0. (4) station d draws numbers: 0.36, 0.77, 0.9, 0.1, 0.1, 0.1, 0.1, 0. (b) in slotted aloha, a station transmits in each time slot with a given probability. what probabilities would you assign to each of the four stations so as to: (i) maximize the efficiency of the protocol? (ii) maximize fairness among the four stations? (c) will the efficiency increase or decrease if we modify slotted aloha as follows: (i) get rid of slots and allow stations to transmit immediately? (ii) implement carrier sensing? (iii) implement collision detection? (iv) implement collision avoidance?

Write a function named printfloatrepresentation(float number) that will print the floating point representation of a number using the format given below. (sign bit) exponent in binary (assumed bit).significandfor example if the number passed an argument is 71 yourprogram should print (0) 10000101 (1).00011100000000000000000similarly if the number passed to the function as argument is -71 the program should print (1) 10000101 (1).00011100000000000000000