Your program must define and call the following driving_cost() function. Given input parameters driven_miles, miles_per_gallon, and dollars_per_gallon, the function returns the dollar cost to drive those miles. Your program should call the function three times to determine the gas cost for 10 miles, 50 miles, and 400 miles. Ex: If the function is called with: 50, 20.0 , 3.1599

my error : Traceback (most recent call last):
File "main. py", line 17, in
mpg = float(input())
EOFError: EOF when reading a line


def driving_cost(mil, mpg, dpg, gal, i):
gal = mil / mpg
result = gal * mpg
return result

if __name__ == '__main__':

mil = float(input())
mpg = float(input())
dpg = float(input())
gal = 0
i = 0

result = driving_cost(mil, mpg, dpg, gal, i )

print('{:.2f}'.format(result))
print('{:.2f}'.format(result))
print('{:.2f}'.format(result))

Write a computer program to calculate the three-phase fault current for a fault at f in figure 1.16, with the network normal, and with one line at a time removedproblems 1.1 write a computer program to calculate the three-phase fault current for a fault at f in figure 1.16, with the network normal, and with one line at a time removed 20 power system relaying from service. the positive-sequence impedance data are given in the accompanying table. use the commonly made assumption that all prefault resistance values are (1.0+j0.0) pu, and neglect all resistance values. calculate the contribution to the fault flowing through the cb b and the voltage at that bus. for each calculated case, consider the two possibilities: cb b2 closed or open. the latter is known as the stub-end fault í• figure 1.16 problem 1.1 system data for figure 1.16 from to positive sequence 0.0+j0.1 0.05j0.15 0.04 j0.2 0.01 jo.i 0.015 + j0.15 0.01 j0.19 0.01 +j0.19 0.03+j0.1 0.0+j0.08 6 6 6 from service. the positive-sequence impedance data are given in the accompanying table. use the commonly made assumption that all prefault resistance values are (1.0 + j 0.0) pu, and neglect all resistance values. calculate the contribution to the fault flowing through the cb b1, and the voltage at that bus. for each calculated case, consider the two possibilities: cb b2 closed or open. the latter is known as the “stub-end” fault.

Which of the following commands is more recommended while creating a bot?

List a few alternative options and input and output over the standerd keyboard and monitor. explain their functioning in details.