If the current through a heater coil is 5 amp and the supply voltage is 120 volts, the coil resistance is

a)0.04 ohm
b)24 ohms.
c)110 ohms
d) 575 ohms

Program description: a c# app is to be created to produce morse code. the morse code assigns a series of dots and dashes to each letter of the alphabet, each digit, and a few special characters (such as period, comma, colon, and semicolon). in sound-oriented systems, the dot represents a short sound and the dash represents a long sound. separation between words is indicated by a space, or, quite simply, the absence of a dot or dash. in a sound-oriented system, a space is indicated by a short period of time during which no sound is transmitted. the international version of the morse code is stored in the data file morse.txt.

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to

How to do this programming flowchart?