Computers and Technology, 21.09.2019 13:50 kkjones1536
How long does a baby dolphin stay with its mum
Answers: 1
Computers and Technology, 22.06.2019 03:00
Check my work the microprocessor is a(n) circuit, which is designed to process data based on a set of instructions. most desktop and laptop devices contain a microprocessor based on the standard. most tablets and smartphones contain processors based on technology. a microprocessor's circuitry is designed to perform a limited number of tasks contained in its set. during processing, an instruction is loaded into the processor's unit. data is loaded into registers in the processor's where arithmetic and logic operations are performed. microprocessor performance can be measured by its speed. other factors affecting overall processing performance include word size, cache size, and instruction set complexity. most digital devices contain only one microprocessor chip, but today's multi- processors contain circuitry that supports parallel processing. computers contain various kinds of memory. random memory is a special holding area for data, program instructions, and the system. it stores data on a temporary basis until the processor makes a data request. ram is different from disk storage because it is , which means that it can hold data only when the computer power is turned on. computers also contain read- memory, which is a type of non-volatile memory that provides a set of "hard-wired" instructions, called the loader, that a computer uses to boot up.
Answers: 3
Computers and Technology, 22.06.2019 17:40
Gabe wants to move text from one document to another document. he should copy the text, paste the text, and open the new document highlight the text, select the cut command, move to the new document, make sure the cursor is in the correct location, and select the paste command select the save as command, navigate to the new document, and click save highlight the text, open the new document, and press ctrl and v
Answers: 1
Computers and Technology, 23.06.2019 02:50
There’s only one game mode that stars with the letter ‘e’ in cs: go. which of the options below is it?
Answers: 1
Computers and Technology, 23.06.2019 15:30
Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to
Answers: 2
How long does a baby dolphin stay with its mum...
Biology, 25.01.2021 22:00
Mathematics, 25.01.2021 22:00
Mathematics, 25.01.2021 22:00
Mathematics, 25.01.2021 22:00
Mathematics, 25.01.2021 22:00
Computers and Technology, 25.01.2021 22:00
Mathematics, 25.01.2021 22:00
Mathematics, 25.01.2021 22:00