Consider the following class declaration. public class Circle
{
private double radius;
public double computeArea()
{
private double pi = 3.14159;
public double area = pi * radius * radius;
return area;
}
// Constructor not shown.
}
Which of the following best explains why the computeArea method will cause a compilation error?
A. Local variables declared inside a method cannot be declared as public or private.
B. Local variables declared inside a method must all be private.
C. Local variables declared inside a method must all be public.
D. Local variables used inside a method must be declared at the end of the method.
E. Local variables used inside a method must be declared before the method header.

You need a reliable network for about twenty-five computers that will be distributed across a large building. it is important that the network be relatively cheap. which topology should you use?

If your accelerator suddenly gets stuck what should you do

Given a link with a maximum transmission rate of 32.8 mbps. only two computers, x and y, wish to transmit starting at time t = 0 seconds. computer x sends filex (4 mib) and computer y sends filey (244 kib), both starting at time t = 0. statistical multiplexing is used, with details as follows packet payload size = 1000 bytes packet header size = 24 bytes (overhead) ignore processing and queueing delays assume partial packets (packets consisting of less than 1000 bytes of data) are padded so that they are the same size as full packets. assume continuous alternating-packet transmission. computer x gets the transmission medium first. at what time (t = ? ) would filey finish transmitting? give answer in milliseconds, without units, and round to one decimal places (e.g. for an answer of 0.013777 seconds you would enter "13.8" without the quotes)