The PIC18F4321 microcontroller is required to drive the LEDs connected to bit 0 of ports C and D based on the input conditions set by switches connected to bit 1 of ports C and D. The I/O conditions are as follows:-If the input at bit 1 of port C is HIGH and the input at bit 1 of port Dis LOW, the LED at port C will be ON and the LED at port D will be OFF.-If the input at bit 1 of port C is LOW and the input at bit 1 of port D is HIGH, the LED at port C will be OFF and the LED at port D will be ON.-If the inputs of both ports C and D are the same (either both HIGH or both LOW), both LEDs of ports C and D will be OFF. Write a C language program for the statement above.

Jason, samantha, ravi, sheila, and ankit are preparing for an upcoming marathon. each day of the week, they run a certain number of miles and write them into a notebook. at the end of the week, they would like to know the number of miles run each day, the total miles for the week, and average miles run each day. write a program to them analyze their data. your program must contain parallel arrays: an array to store the names of the runners and a two-dimensional array of five rows and seven columns to store the number of miles run by each runner each day. furthermore, your program must contain at least the following functions: a function to read and store the runners’ names and the numbers of miles run each day; a function to find the total miles run by each runner and the average number of miles run each day; and a function to output the results. (you may assume that the input data is stored in a file and each line of data is in the following form: runnername milesday1 milesday2 milesday3 milesday4 milesday5 milesday6 milesday7.)