the time base for a timer instruction is 0.01 seconds. what is the delay time if the preset value is 3000

Ineed on my history if anyone can check out the last few questions i posted and i will be posting !

Http is the protocol that governs communications between web servers and web clients (i.e. browsers). part of the protocol includes a status code returned by the server to tell the browser the status of its most recent page request. some of the codes and their meanings are listed below: 200, ok (fulfilled)403, forbidden404, not found500, server errorgiven an int variable status, write a switch statement that prints out the appropriate label from the above list based on status.

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to