Explain what must be performed in the scenario below. An end user needs to calculate a broadcast address using bitwise calculation. The IP address is 192.35.128.93 and the subnet mask is 255.255.255.224. The binary form of the IP address is 11000000.00100011.10000000.01011101 . The binary form of the subnet mask is 11111111.11111111.11111111.11100000 .

Felicia wants to become a head surgeon by december 2013. she designs the career milestones that she would need to complete her goal. by june 2013, she was not licensed. which best describes what she should do?

It is vital to research each of the services you plan to disable before implementing any change, especially on critical machines such as the: a. servers in the test environment. b. domain controller and other infrastructure servers. c. desktops that have previously been attacked. d. desktops used by upper-level management.

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?