Match the storage devices to their properties. Tiles:
A. Solid-state storage
B. Magnetic storage
C. Optical storage
D. Read-only memory
E. Random access memory

Answers:
1. Represents data as 1 or 0 by changing the alignment of tiny iron particles on its surface
2. Stores data by correlating the absense or presence of light with the binary system
3. Similar to RAM but with a special circuit to retain data when powered off
4. Stores data that the CPU is working on at any given point of time
5. Stores non-changable instructions for starting up a computer

To produce a starlight effect in her photograph, lina should choose the filter for her camera.

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to

The processing of data in a computer involves the interplay between its various hardware components.