What is the difference between a router and a modem

You will be given two character arrays of the same size, one will contain a number of ships. ships will move around the character array based on which way they are facing and the route they are on. routes are given in the other array. the route consists of '-' and '|' for straight paths, '\' and '/' for curves, and '+' for intersections. there are ships on these routes. ships always face a direction, '^' for up, '> ' for right, 'v' for down, and '< ' for left. any time the ships hit a '\' or a '/' it will turn as you would expect a ship to turn (e.g. a '^' that moves into a '/' will turn right). at an intersection, ships will always continue straight through. all ships move at the same speed, ships take turns moving and all ships move during one 'tick'. the one in the most top left goes first, followed by those to its right, then the ones in the next row. it iterates along the rows and then down the columns. each ship moves one space on its turn moving along the route. your function needs to return the position of the first collision between two ships and the number of ticks before the crash occurred.

Pthreads programming: create and terminate a thread write a c++ program that creates a thread. the main will display a message “hello world from the main”. the main will create a thread that will display a message “hello world from the thread” and then terminates with a call to pthread_exit()

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a.if the manual switch s is on, then the light l is on. b.besides the manual switch, there is a motion detector, m1, which activatesthis light.c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d.the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.