Water is subjected to various temperatures and pressures as indicated below draw a separate p-v and t-v diagram that includes lines of constant tand/or p for each set of temperatures and pressures label the p-v and t-v diagrams with values for each set of conditions below locate (approximately) the point(s) on the diagram that represents each t and p. draw the point(s) on each graph. identify the phase. a)-p=80 lb/in2, t=312.07°f b)-p=80 lb/in2, t=400 °f c)- t=400 f, p =360 lb/in2 d)-t= 320°f, p=70 lbt/in2 e)- t =10°f, p =14.7 lb/in2

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10