Engineering, 11.07.2019 01:10 swspanda179400
Assuming the following, what is the fill factor for the following solar cell? power=100w voc=30v isc=10a
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
You know the right answer?
Assuming the following, what is the fill factor for the following solar cell? power=100w voc=30v is...
Questions
Mathematics, 17.09.2019 19:50
Mathematics, 17.09.2019 19:50
English, 17.09.2019 19:50
History, 17.09.2019 20:00
English, 17.09.2019 20:00
Social Studies, 17.09.2019 20:00
History, 17.09.2019 20:00
Computers and Technology, 17.09.2019 20:00
Mathematics, 17.09.2019 20:00
Mathematics, 17.09.2019 20:00
