subject
Engineering, 15.01.2020 13:31 loredohome

Water is the working fluid in a carnot vapor power cycle. saturated liquid enters the boiler at a pressure of 8 mpa, and saturated vapor enters the turbine. the condenser pressure is 8 kpa include the effects of irreversibilities in the adiabatic expansion and compression processes with nt-9196 and ? p-93%. determine (a) the thermal efficiency (b) the back work ratio. (c) the heat transfer to the working fluid per unit mass passing through the boiler, in kj/kg. (d) the heat transfer from the working fluid per unit mass passing through the condenser, in kj/kg

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
question
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
You know the right answer?
Water is the working fluid in a carnot vapor power cycle. saturated liquid enters the boiler at a pr...
Questions
Questions on the website: 13722362