Adiving board is to be designed that is 6 foot long, 14in wide. the maximum load at the end of the beam is 400lb. the diving board can be considered a cantilever beanm 2. a. draw a free body diagram of the beam b. draw the shear force diagram and bending moment diagram for the beam c. assuming the material is made of wood and the maximum normal stress ( must not exceed 4kps, determine the required height of the beam for a rectangular section.

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?