Engineering, 11.07.2019 02:40 hei40563273
A100mm long steel bush with 39.98mm internal diameter and 60mm outer diameter is force fitted onto a steel tube. the150mm long steel tube has 40.02mm outer diameter and 25mm internal diameter. the steel tube is subject to an internal pressure of 20mpa. what is the resulting interference pressure between the bush and the tube, assuming that their nominal diameters are 40mm? the young's modulus for steel should be taken as 200gpa and the poisson's ratio as 0.28
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 19:10
What are the major differences between injection molding and extrusion?
Answers: 2
Engineering, 04.07.2019 19:10
For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.
Answers: 2
You know the right answer?
A100mm long steel bush with 39.98mm internal diameter and 60mm outer diameter is force fitted onto a...
Questions
Mathematics, 16.01.2021 18:10
English, 16.01.2021 18:10
Mathematics, 16.01.2021 18:10
History, 16.01.2021 18:10
Biology, 16.01.2021 18:10
