subject
Engineering, 11.07.2019 03:30 jaygolden370

Circular fins of uniform cross section, with diameter of 10 mm and length of 50 mm, are attached to a wall with surface tem perature of 350°c. the fins are made of material with thermal conductivity of 240 w/m k, and they are exposed to an ambient air condition of 25°c and the convection heat transfer coefficient is 250 w/m2-k. determine the temperature at the middle of the fin for infinitely long fin.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
question
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
Circular fins of uniform cross section, with diameter of 10 mm and length of 50 mm, are attached to...
Questions
question
Mathematics, 26.06.2020 16:01
Questions on the website: 13722360