Engineering, 11.07.2019 04:10 JeroMii
Draw a typical process map for ti-6al-4v that can be used to predict microstructure of parts fabricated usin g any directed energy deposition process. define x and y axes of the plot
Answers: 2
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Draw a typical process map for ti-6al-4v that can be used to predict microstructure of parts fabrica...
Arts, 20.09.2020 05:01
Mathematics, 20.09.2020 05:01
Business, 20.09.2020 05:01
Mathematics, 20.09.2020 05:01
Mathematics, 20.09.2020 05:01
Mathematics, 20.09.2020 05:01
Mathematics, 20.09.2020 05:01
French, 20.09.2020 05:01
Biology, 20.09.2020 05:01
Mathematics, 20.09.2020 05:01
Mathematics, 20.09.2020 05:01
Mathematics, 20.09.2020 05:01
Mathematics, 20.09.2020 05:01