Engineering, 11.07.2019 04:20 chrissycherry

Spheres with 40-mm diameter are heated to a uniform temperature of 400°c and then suddenly removed form the over and placed in a forced air bath operating at 25°c with a convection coefficient of 300 w/m^2 k on the sphere surfaces. the thermophysical properties of the sphere material are p=3000 kg/m^3 c=850j/kgk, and k=15 w/m k. 1)- how long must the spheres remain in the air bath for 80% of the thermal energy to be removed? 2)- once 80% of the thermal energy is removed, the spheres are then placed in an adiabatic enclosure that prevents any more heat transfer between the spheres and their surroundings what uniform temperature will the spheres eventually reach?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

Answer

Engineering, 04.07.2019 19:10

10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.

Answers: 2

Answer

You know the right answer?

Spheres with 40-mm diameter are heated to a uniform temperature of 400°c and then suddenly removed f...

Questions