subject
Engineering, 11.07.2019 04:30 lele2010

Aclosed gas turbine unit uses helium as the working fluid. there are two stages of compression with intercooling from 480kpa and 290k to a maximum pressure of 2.75mpa with an intermediate pressure of 1149kpa. the regenerator has an effectiveness of 60% and delivers the helium to the high-temperature heat exchanger, where it is heated to 890k. there are two turbine stages, the first discharging at 1170kpa. following the first turbine stage, a heat exchanger re-heats the helium to 890k. the second turbine exhausts at 480kpa to the regenerator. all the expansion and compression processes are isentropic. a)- the compressor work per kilogram b)- the turbine work per kilogranm c)- the heat added to the cycle per kilogram d)- the thermal efficiency e)- the power output for a helium flow rate of 45kg/s

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 08:10
Which of the following is an easy way to remember the modified β€œx” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed
Answers: 1
question
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 Β°f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
question
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
question
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
You know the right answer?
Aclosed gas turbine unit uses helium as the working fluid. there are two stages of compression with...
Questions
question
Mathematics, 28.02.2020 05:49
question
English, 28.02.2020 05:49
Questions on the website: 13722367