Engineering, 17.07.2019 23:30 Ezonthekid
Air enters the compressor of an ideal air standard brayton cycle at 100 kpa and 290 k with a mass flow rate (m? ) of 5 kg/s. the compressor pressure ratio is 10. the turbine inlet temperature is 1500 k. a regenerator with an effectiveness of 60 % is incorporated in the cycle. use the pg model for air. determine the thermal efficiency (? th, brayton) of the cycle.
Answers: 3
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20Β°c. the pipe has an outer surface temperature of 65Β°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 19:20
To save energy, the air supply to a 2000 ft office has been shut off overnight and the room temperature has dropped to 40Β°f. in the morning, the thermostat is reset to 70Β°f and warm air at 120 f begins to flov in at 200ft'/min. the air is well mixed within the room, and an equal mass flow of air at room temperature (changing with time) is withdrawn through a return duct. the air pressure is nearly 1 atm everywhere. ignoring heat transfer with the surroundings and kinetic and potential energy effects, estimate how long it takes for the room temperature to reach 70Β°f. plot the room temperature as a function of time.
Answers: 1
Engineering, 06.07.2019 03:10
Steel balls 12 mm in diameter are annealed by heating to 1150 k and then slowly cooled to 400 k in an air att 325 k and h -20 w/m2 k. assume the properties of the steel to be k- 40 w/m k,p 7800 kg/m3, and cp 600 j/kg k. a. determine whether lumped system method can be used to analyze this problem and if so why" b. determine the time required for the cooling process. c. determine the total amount of heat lost from each ball to the ambient air
Answers: 1
Air enters the compressor of an ideal air standard brayton cycle at 100 kpa and 290 k with a mass fl...
English, 19.03.2021 18:40
Mathematics, 19.03.2021 18:40
Mathematics, 19.03.2021 18:40
Mathematics, 19.03.2021 18:40
Mathematics, 19.03.2021 18:40
Mathematics, 19.03.2021 18:40
Mathematics, 19.03.2021 18:40
Mathematics, 19.03.2021 18:40
Mathematics, 19.03.2021 18:40
Mathematics, 19.03.2021 18:40
Mathematics, 19.03.2021 18:40
History, 19.03.2021 18:40
Mathematics, 19.03.2021 18:40
Biology, 19.03.2021 18:40