subject
Engineering, 17.07.2019 23:40 keniaguevara32

An actual refrigerator operates on the vapor-compression refrigeration cycle with refrigerant-22 as the working fluid. the refrigerant evaporates at −15°c and condenses at 40°c. the isentropic efficiency of the compressor is 83 percent. the refrigerant is superheated by 5°c at the compressor inlet and subcooled by 5°c at the exit of the condenser. the properties of r-22 in the case of actual operation are h1 = 402.49 kj/kg, h2 = 454.00 kj/kg and h3 = 243.19 kj/kg. the properties of r-22 in the case of ideal operation are h1 = 399.04 kj/kg, h2 = 440.71 kj/kg and h3 = 249.80 kj/kg. note: state 1: compressor inlet, state 2: compressor exit, state 3: condenser exit, state 4: evaporator inlet. a) the heat removed from the cooled space is (kj/kg)b) the work input is (kj/kg) c) the cop is

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
question
Engineering, 04.07.2019 18:10
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
question
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
You know the right answer?
An actual refrigerator operates on the vapor-compression refrigeration cycle with refrigerant-22 as...
Questions
Questions on the website: 13722363