Engineering, 17.07.2019 23:40 drivinghydra

An arc-welding operation is used to weld aluminum substrates with a heat transfer factor 0.80. the aluminumm melting temperature is im -930°k and melting factor - 0.40. the aluminum substrates are welded using a fillet weld with a cross-sectional area 25.0 mm2 a)-if the welding power used is 3200 w, determine the travel speed at which the welding operation can be accomplished. b)-if the metal to be welded is high carbon steel with melting factor 0.60 and melting temperature tm 1650°k. determine the welding power required to weld the high carbon steel substrates at the same travel speed obtained in (a). c)-from the power result in part (b), if the welding voltage 20 volts, determine the value for the current in the operation.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

Engineering, 04.07.2019 18:10

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options

Answers: 2

Answer

You know the right answer?

An arc-welding operation is used to weld aluminum substrates with a heat transfer factor 0.80. the a...

Questions