Engineering, 18.07.2019 01:20 isabelsmhl
Briefly describe the advantages and disadvantages of spur gears and helical gears.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
Engineering, 04.07.2019 19:10
Analyze the factors that influence the choice between the following pairs of processes to make the products indicated: i) sand casting versus die casting of an electric-motor housing ii) thread rolling versus machining of a bolt for high-strength application. (co3/c5)
Answers: 3
Engineering, 06.07.2019 05:20
An industrial centrifugal air compressor has 34 radial blades that has no pre-whirl. the tip speed of the blades is 300 m/s, and the radial component of the air velocity at the tip is 150 m/s. air is inducted at 101.3 kpa and a stagnation temperature of 305 k. the mass flow rate is 3 kg/s. consider the power input factor to be equal to 1.04 and a stagnation temperature at the compressor exit of 370 k, if the flow is isentropic. assume cp-1005 j/kg.k. find the power input to the compressor (in kw)
Answers: 3
You know the right answer?
Briefly describe the advantages and disadvantages of spur gears and helical gears....
Questions
Health, 06.05.2020 03:39
Mathematics, 06.05.2020 03:39
Mathematics, 06.05.2020 03:39
Mathematics, 06.05.2020 03:39
