Engineering, 18.07.2019 21:30 lukeperry
there are a number of requirements that employers must do to protect their workers from caught-in or
between hazards. which of these is required if the worker's body, hands or clothing may come into contact
with moving parts?
o a prevent workers from being pinned under heavy equipment
o b. provide guards on power tools and other equipment with moving parts
o c. provide protection to workers in an excavation or trench
od. protect workers from collapsed scaffolding
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 15:10
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
You know the right answer?
there are a number of requirements that employers must do to protect their workers from caught-in or...
Questions
Mathematics, 25.07.2019 20:10
English, 25.07.2019 20:10
Mathematics, 25.07.2019 20:10
Mathematics, 25.07.2019 20:10
History, 25.07.2019 20:10
Biology, 25.07.2019 20:10
Mathematics, 25.07.2019 20:10
