subject
Engineering, 18.07.2019 21:30 EmmaPreston43

Steam enters a turbine operating at a steady state at 8 mpa and 700 c. the mass flow rate of the steam is 135 kg/min. the steam exits the turbine as a saturated vapor at 18 kpa. the turbine produces 2.2 mw of power. ignoring potential and kinetic energy effects determine the: rate of heat transfer from the turbine to the environment in kw rate of entropy production in kw/k for an enlarged control volume that includes the turbine and enough of its surroundings that the heat transfer occurs at the ambient temperature of 25 °c. hint! assume that the environment acts as a reservoir. what does this imply relative to the temperature?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
question
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
question
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
question
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
You know the right answer?
Steam enters a turbine operating at a steady state at 8 mpa and 700 c. the mass flow rate of the ste...
Questions
question
Mathematics, 30.01.2020 16:03
Questions on the website: 13722359