subject
Engineering, 19.07.2019 01:30 kelseyxxswd2932

Water enters a circular tube with a flow rate of 0.012 kg/s and a uniform inlet temperature of 20 °c. the velocity profile is fully developed when the flow enters the tube, but the temperature profile is not. the tube, which has a length of 5 m and a diameter of 15 mm, has a fixed surface temperature of 40 °c. a) estimate the distance from the entrance at which the flow becomes fully developed thermally. b) determine the average convection coefficient on the inside surface of the pipe. c) determine the mean exit temperature. d) determine the heat transfer rate to the water.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
question
Engineering, 04.07.2019 18:20
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
question
Engineering, 06.07.2019 02:30
Plot schematically the tensile stress versus strain curves for a typical thermoplastic material at a temperature below its glass transition temperature (tg and at a temperature above its tg, respectively. do the same for a typical thermosetting material. list in a table any differences or similarities between the two materials at t> tg and t < tg, respectively, and relate them to the structures of the two types of polymers
Answers: 3
question
Engineering, 06.07.2019 03:10
Two slings are used to lift a girder of length l and uniform weight per unit length. what is the best position for the slings if the bending moment due to the weight of the girder is to be kept to a minimum?
Answers: 2
You know the right answer?
Water enters a circular tube with a flow rate of 0.012 kg/s and a uniform inlet temperature of 20 °c...
Questions
question
Arts, 05.05.2020 19:20
question
English, 05.05.2020 19:20
question
Mathematics, 05.05.2020 19:20
Questions on the website: 13722362