Engineering, 19.07.2019 02:20 smarty5187
What happens to cutting force as the following increase: a)-rake angle b)-material shear strength c)-depth of cut. are your findings as expected based on the theory of machining? why or why not?
Answers: 1
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:10
Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when
Answers: 1
What happens to cutting force as the following increase: a)-rake angle b)-material shear strength c...
Mathematics, 28.03.2021 20:50
Mathematics, 28.03.2021 20:50
Mathematics, 28.03.2021 20:50
English, 28.03.2021 20:50
Geography, 28.03.2021 20:50
Mathematics, 28.03.2021 20:50
Mathematics, 28.03.2021 20:50
Mathematics, 28.03.2021 20:50
English, 28.03.2021 20:50
Mathematics, 28.03.2021 20:50
English, 28.03.2021 20:50
Social Studies, 28.03.2021 20:50
Chemistry, 28.03.2021 20:50
Mathematics, 28.03.2021 20:50