Engineering, 19.07.2019 04:40 Crxymia
Why must a synchronous motor never be started when dc excitation is applied to the rotor
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:20
Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options
Answers: 2
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
You know the right answer?
Why must a synchronous motor never be started when dc excitation is applied to the rotor...
Questions
Social Studies, 29.01.2021 07:30
Mathematics, 29.01.2021 07:30
Geography, 29.01.2021 07:30
Mathematics, 29.01.2021 07:30
Mathematics, 29.01.2021 07:30
Mathematics, 29.01.2021 07:30
Mathematics, 29.01.2021 07:30
History, 29.01.2021 07:30
Mathematics, 29.01.2021 07:30
Mathematics, 29.01.2021 07:30
Mathematics, 29.01.2021 07:30
History, 29.01.2021 07:30
Social Studies, 29.01.2021 07:30
Chemistry, 29.01.2021 07:30
