Engineering, 20.07.2019 02:30 kcarstensen59070
The following yield criteria are dependent on hydrostatic stress (a) maximum distortion energy and maximum normal stress (b) tresca and mohr-coulomb (c) tresca and von-mises (d) maximum normal stress and mohr-coulomb
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
You know the right answer?
The following yield criteria are dependent on hydrostatic stress (a) maximum distortion energy and m...
Questions
Biology, 05.11.2019 00:31
History, 05.11.2019 00:31
Biology, 05.11.2019 00:31
Social Studies, 05.11.2019 00:31
Computers and Technology, 05.11.2019 00:31
Mathematics, 05.11.2019 00:31
