subject
Engineering, 26.07.2019 16:10 collinpeterson21

Multi-processors computer operates in a server room in a building of weather station located in the mountains at altitude of 3000 m. the computer is cooled by three 1.5 w fans located at outlets from chassis. the number of processors is 4. the temperature and pressure in the server room are 25°c and 66.63 kpa, respectively. the temperature and air velocity at the outlets from the chassis are 50°c and 40.0 m/min, respectively, while diameters of fans are 0.1 m. determine the thermal power of each processor. assume that 100 w is lost to the surroundings through chassis walls. neglect the change in kinetic energy of cooling air as well as assume no variation in the static pressure. the air may be treated as an ideal di-atomic gas with gas constant 287 j/(kgk).

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
question
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
You know the right answer?
Multi-processors computer operates in a server room in a building of weather station located in the...
Questions
question
Mathematics, 23.06.2021 15:30
question
SAT, 23.06.2021 15:30
Questions on the website: 13722360