Engineering, 26.07.2019 17:30 desotoaustin
Determine an expression for the vorticity of the flow field described by v= -xy^3i+ y^4j. is the flow irrotational?
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Determine an expression for the vorticity of the flow field described by v= -xy^3i+ y^4j. is the flo...
Mathematics, 02.08.2019 20:30
Mathematics, 02.08.2019 20:30
Mathematics, 02.08.2019 20:30
Health, 02.08.2019 20:30
Biology, 02.08.2019 20:30
Chemistry, 02.08.2019 20:30
Mathematics, 02.08.2019 20:30
Mathematics, 02.08.2019 20:30
Mathematics, 02.08.2019 20:30
Social Studies, 02.08.2019 20:30
Mathematics, 02.08.2019 20:30
Mathematics, 02.08.2019 20:30