Engineering, 26.07.2019 18:20 WonTonBagel
Water vapor at 6 mpa, 600°c enters a turbine operating at steady state and expands adiabatically to 10 kpa. the mass flow rate is 2 kg/s and the isentropic turbine efficiency is 94.7%. kinetic and potential energy effects are negligible. determine: (a) the power developed by the turbine, in kw. (b) the rate at which exergy is destroyed within the turbine, in kw. (c) the percent exergetic turbine efficiency. let to = 298 k, po = 1 atm.
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
You know the right answer?
Water vapor at 6 mpa, 600°c enters a turbine operating at steady state and expands adiabatically to...
Questions
English, 08.10.2019 21:30
Biology, 08.10.2019 21:30
