Engineering, 26.07.2019 19:10 king3620
A2-cm-diameter vertical water jet is injected upward by a nozzle at a speed of 15 m/s. determine the maximum weight of a flat plate that can be supported by this water jet at a height of 2 m from the nozzle. take the density of water to be 1000 kg/m3 the maximum weight of a flat plate that can be supported by the water jet n.
Answers: 2
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
Engineering, 04.07.2019 18:20
For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor
Answers: 3
A2-cm-diameter vertical water jet is injected upward by a nozzle at a speed of 15 m/s. determine the...
Health, 25.07.2019 16:20
History, 25.07.2019 16:20
Mathematics, 25.07.2019 16:20
History, 25.07.2019 16:20
History, 25.07.2019 16:20
English, 25.07.2019 16:20