subject
Engineering, 30.07.2019 20:30 babygail0818

Saturated steam at 4 bars absolute pressure with a mean velocity of 3 m/s flows through a horizontal pipe whose inner and outer diameters are 55 and 65 mm, respectively. the heat transfer coefficient for the steam flow is known to be 11,000 w/m2·k. if the pipe is covered with a 35-mm-thick layer of 85% magnesia insulation and is exposed to atmospheric air at 25°c, determine the rate of heat transfer by free convection to the room per unit length of the pipe. if the steam is saturated at the inlet of the pipe, estimate its quality at the outlet of a pipe 50 m long. start with the assumption that 60°c, then calculate the corresponding heat-transfer coefficient and a new estimate of . do not iterate. properties of the steam are 566 kj/kg, 2727 kj/kg, 2160 kj/kg, 416 k, and 0.476 m3/kg. evaluate the properties of the 85% magnesia insulation at 310 k. obtain the nusselt number using the churchill and chu correlation for the long horizontal cylinder.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when
Answers: 1
question
Engineering, 05.07.2019 23:20
Which one of the following faults cause the coffee in a brewer to keep boiling after the brewing cycle is finished? a. an open circuit in the heating element b. a short circuit at the terminals c. welded contacts on the thermostat d. a leak around the gasket
Answers: 3
question
Engineering, 06.07.2019 03:10
Steel balls 12 mm in diameter are annealed by heating to 1150 k and then slowly cooled to 400 k in an air att 325 k and h -20 w/m2 k. assume the properties of the steel to be k- 40 w/m k,p 7800 kg/m3, and cp 600 j/kg k. a. determine whether lumped system method can be used to analyze this problem and if so why" b. determine the time required for the cooling process. c. determine the total amount of heat lost from each ball to the ambient air
Answers: 1
question
Engineering, 06.07.2019 03:10
Air is flows through an adiabatic nozzle with an inlet pressure of 400 psia at a temperature of 300°f and a velocity of 20 ft/s. the outlet pressure is 40 psia and the velocity is 800 ftl/s. determine the outlet temperature of the air using: a) property tables b) specific heat (using the specific heat value for air at 300°f)
Answers: 3
You know the right answer?
Saturated steam at 4 bars absolute pressure with a mean velocity of 3 m/s flows through a horizontal...
Questions
question
English, 24.11.2020 05:20
question
English, 24.11.2020 05:20
question
Mathematics, 24.11.2020 05:20
question
Mathematics, 24.11.2020 05:20
question
Mathematics, 24.11.2020 05:20
question
Mathematics, 24.11.2020 05:20
Questions on the website: 13722359