Athree-point bending test was performed on an aluminum oxide specimen having a circular cross section of radius 5.1 mm; the specimen fractured at a load of 2980 n when the distance between support points was 50 mm. another test is to be performed on a specimen of this same material, but one that has a square cross section of 14 mm in length on each edge. at what load would you expect this specimen to fracture if the support point separation is maintained at 50 mm?

What precautions should you take to prevent injuries when dealing with heavy loads?

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2