Engineering, 07.08.2019 02:20 Rayzamartinez2757
Consider an opaque horizontal plate that is well insulated on its back side. the irradiation on the plate is 2500 w/m2, of which 500 w/m2 is reflected. the plate is at 227 c and has an emissive power of 1200 w/m2. air at 127 c flows over the plate with a heat transfer convection coefficient of 15 w/m2 k. determine the emissivity, absorptivity, and radiosity of the plate. what is the net heat transfer rate per unit area?
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
Consider an opaque horizontal plate that is well insulated on its back side. the irradiation on the...
Questions
Engineering, 30.07.2021 01:00
Chemistry, 30.07.2021 01:00
Mathematics, 30.07.2021 01:00
Computers and Technology, 30.07.2021 01:00
Computers and Technology, 30.07.2021 01:00
