Engineering, 07.08.2019 17:20 lexybellx3
Two previously undeformed cylindrical specimens of an alloy are to be strain hardened by reducing their cross-sectional areas (while maintaining their circular cross sections). for one specimen, the initial and deformed radii are 18 mm and 13 mm, respectively. the second specimen, with an initial radius of 10 mm, must have the same deformed hardness as the first specimen; compute the second specimen's radius, in mm, after deformation.
Answers: 2
Engineering, 04.07.2019 18:20
What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.
Answers: 3
Engineering, 04.07.2019 18:20
Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg
Answers: 2
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
Engineering, 04.07.2019 19:10
Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg.m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?
Answers: 3
Two previously undeformed cylindrical specimens of an alloy are to be strain hardened by reducing th...
History, 10.12.2021 04:00
Mathematics, 10.12.2021 04:00
Biology, 10.12.2021 04:00
Biology, 10.12.2021 04:00
Biology, 10.12.2021 04:00
History, 10.12.2021 04:00
English, 10.12.2021 04:00
Mathematics, 10.12.2021 04:00
Advanced Placement (AP), 10.12.2021 04:00
Mathematics, 10.12.2021 04:00