Engineering, 07.08.2019 18:20 avasteinhebel10
A50 mm diameter square-thread screw having a pitch of 8 mm carries a tensile load of 15 kn. calculate: - the axial stress on the screw what is the min length of nut engagement needed if the allowable bearing stress is 10 mpa what is the shear stress applied on screw and nut
Answers: 1
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 06.07.2019 03:10
Consider two concentric spheres forming an enclosure with diameters of 12 cm and 18 cm the spheres are maintained at uniform temperatures ti-50°c and t2 = 250°c and have emissivities .45 and .8, respectively. determine the net rate of radiation heat transfer between the two spheres per unit surface area.
Answers: 1
A50 mm diameter square-thread screw having a pitch of 8 mm carries a tensile load of 15 kn. calculat...
Mathematics, 05.05.2020 19:15
Physics, 05.05.2020 19:15
Mathematics, 05.05.2020 19:15
History, 05.05.2020 19:15
English, 05.05.2020 19:15
Computers and Technology, 05.05.2020 19:15
Advanced Placement (AP), 05.05.2020 19:15
Spanish, 05.05.2020 19:15