Engineering, 07.08.2019 18:20 joooosshhhh
Which statement is incorrect? one of the purposes of dimensional analysis is: a. to predict trends in the relationship between parameters b. to generate non-dimensional parameters that in the design of experiments and the reporting of experimental results c. to save time and money by performing tests on a model rather than on a prototype d. to obtain scaling laws so that prototype performance can be predicted for model performance e. to ensure that prototypes will accurately reproduce the dynamic behavior of a model f. none of the above
Answers: 2
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:20
Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10ä1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t
Answers: 3
Engineering, 04.07.2019 18:20
A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?
Answers: 3
Which statement is incorrect? one of the purposes of dimensional analysis is: a. to predict trends...
Mathematics, 12.03.2021 19:50
Mathematics, 12.03.2021 19:50
Mathematics, 12.03.2021 19:50
Mathematics, 12.03.2021 19:50
Mathematics, 12.03.2021 19:50
Mathematics, 12.03.2021 19:50
Mathematics, 12.03.2021 19:50
Mathematics, 12.03.2021 19:50
Mathematics, 12.03.2021 19:50
Chemistry, 12.03.2021 19:50
Physics, 12.03.2021 19:50