Engineering, 07.08.2019 18:20 nickname0097
An oil storage tank has one side sloping at 60° to the horizontal. a circular opening of diameter 300mm is cut into the side of the tank, and is covered by a plate bolted into place. the level of oil in the tank is 1.2m above the top of the opening. find: (a) the force acting on the plate (b) the depth of the centre if pressure for the plate below the surface of the oil
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
Engineering, 05.07.2019 04:30
Technician a says that in a worm gear steering system, most excessive steering free play is usually found in the gearbox. technician b says that in a rack-and-pinion steering system, excessive free play can be found in the bushings. who is correct?
Answers: 2
You know the right answer?
An oil storage tank has one side sloping at 60° to the horizontal. a circular opening of diameter 30...
Questions
Advanced Placement (AP), 04.11.2020 19:40
Mathematics, 04.11.2020 19:40
Mathematics, 04.11.2020 19:40
Mathematics, 04.11.2020 19:40
Mathematics, 04.11.2020 19:40
