Engineering, 07.08.2019 18:30 star6097

Apalm oil mill produces an average of 295 tonne of crude palm oil daily. determine the daily potential energy generation and annual revenue if a biogas power plant with a capacity factor of 75 % is utilized here for renewable energy assume 3 m3 of pome is generated per tonne of cpo production'; the theoretical volume of cod for methane is 0.35 1/g; and methane calorific value of 37.75 mj/m3.1. determine the following values: - a)- volume of pome residues b)- mass of cod produced c)-volume of ch4 and its potential energy 2. choose a suitable conversion technology to calculate a)- annual energy generation b)- annual revenue

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

Answer

You know the right answer?

Apalm oil mill produces an average of 295 tonne of crude palm oil daily. determine the daily potenti...

Questions