subject
Engineering, 20.08.2019 17:20 abbeygrace13

Asteam power plant operates on the rankine cycle with steam en rankine cycle with steam entering the high pressure turbine at 80 bar, 560°c with a mass flow rate of 2x10 kg/hr. the flow rate of 2x100kg/hr. the steam exits the high pressure turbine at 5 bar, 180°c where the steam is then sent back where the steam is then sent back to the boiler and reheated to 480°c before expanding through the low pressure turbine to cooling water enters the condenser from a lake at 20°c and exits at 32°c. assume the low pressure turbine has an isentropic efficiency of 92% and that the pumps opera isentropically. draw a t-s diagram of this cycle and determine the following: high pressure turbine isentropic efficiency net power output, mw low pressure turbine exit quality cycle thermal efficiency the mass flow rate of the cooling water from the lake

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
question
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
question
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
question
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
You know the right answer?
Asteam power plant operates on the rankine cycle with steam en rankine cycle with steam entering the...
Questions
Questions on the website: 13722361