Engineering, 20.08.2019 20:10 xlxJazmin

In a gear-driven exhaust fan and to improve the air flow, the speed of the fan needs to be increased to 460 rpm, but it must be as close to this speed as possible. the existing 3- hp motor will be used, which operates at 1750 rpm. the housing should not be altered, which has a bearing system with a center distance of 9.5 in. determine required diameters for the gears. (a) find the velocity ratio determine the pinion and gear diameters if motor gear has 22 teeth, find the diametral pitch pd and fan gear number of teeth (d) determine the output torque

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero

Answers: 2

Answer

Engineering, 04.07.2019 19:10

10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.

Answers: 2

Answer

Engineering, 04.07.2019 19:10

A)-in the process of engineering design, explain the contribution of material selection. b)- explain the procedure of synthesis as is employed in engineering design. c)- is there any relationship between ergonomics and engineering design? explain. d)- safety consideration in engineering design includes human, product and the enviroment . explain how safety will be incorporated into the design?

Answers: 3

Answer

Engineering, 06.07.2019 04:10

Steam enters a converging-diverging nozzle at 1.0 mpa and 500°c with a negligible velocity at a mass flow rate of 2.5 kg/s, and it exits at a pressure of 200 kpa. assuming the flow through the nozzle to be isentropic, determine: the exit area and (a) (b) the exit mach number

Answers: 2

Answer

You know the right answer?

In a gear-driven exhaust fan and to improve the air flow, the speed of the fan needs to be increased...

Questions