Engineering, 21.08.2019 02:00 alexbanda996

Acircular roofing panel of radius 1 m is installed on the roof of a home. the panel is exposed to the ambient air at t∞ = 25°c (assume that tsur = t∞ = 25°c). the panel absorbs surrounding irradiation (gsur) with an absorptivity (α) of 0.9 and emits radiation out (esur) with an emissivity (ε) of 0.4. the panel surface temperature is measured to be 50°c. determine the ambient convective heat transfer coefficient (h) in w/m2 k. neglect any conduction losses from the panel.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 23:20

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

Answer

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

Answer

You know the right answer?

Acircular roofing panel of radius 1 m is installed on the roof of a home. the panel is exposed to th...

Questions