Engineering, 21.08.2019 05:10 tonimgreen17p6vqjq

Heavy fuel oil flows in a horizontal pipe with diameter of 95 cm. the oil flow rate is 0.4 m^3/s. the properties of heavy fuel oil are: density= 991 kg/m3 , and kinematic viscosity= 3.6x10^−4 m^2/s. (a) calculate the entrance length of this pipe. (b) obtain the pressure drop per unit length of the pipe and the centerline velocity. (c) obtain the shear stress at the wall and at a distance 20 cm from the centerline. (d) find the equation for the velocity distribution as a function of r only. (e) what angle is needed for a downhill flow in the pipe to make the pressure drop zero? is this possible? explain.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation

Answers: 1

Answer

You know the right answer?

Heavy fuel oil flows in a horizontal pipe with diameter of 95 cm. the oil flow rate is 0.4 m^3/s. th...

Questions