Engineering, 21.08.2019 16:20 ayeletstrauss
For an outdoor air temperature of 20°f, 45,000 btu/hr is required to maintain the temperature in a house at 72°f. a heat pump using r-22 as the refrigerant is used to supply this heat. the r-22 leaves the evaporator at p = 45 psi, t = 12°f and the condenser operates at a pressure of 250 psi. assuming an isentropic compressor efficiency of 82%, determine: a) the refrigerant flow rate, b) the compressor power input, and c) the coefficient of performance
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:10
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
You know the right answer?
For an outdoor air temperature of 20°f, 45,000 btu/hr is required to maintain the temperature in a h...
Questions
History, 23.05.2021 22:10
Geography, 23.05.2021 22:10
Mathematics, 23.05.2021 22:10
Mathematics, 23.05.2021 22:10
English, 23.05.2021 22:10
English, 23.05.2021 22:10
English, 23.05.2021 22:10
Mathematics, 23.05.2021 22:10
English, 23.05.2021 22:10
