Engineering, 22.08.2019 00:30 avagracesmith5

Air enters an adiabatic turbine at 2.8 mpa and 400 °c and expands to a lower pressure of 150 kpa. assume an isentropic efficiency of 90% for the turbine. (a) assume air to be an ideal gas with constant specific heats at the anticipated average temperature of 400 k. why is it safe to do so? (6) solve for the actual work per unit of mass produced by the turbine. (c) determine the actual outlet temperature of the turbine. (d) draw the t-s diagram for the air passing through the turbine (show the actual and isentropic processes). (e) how much entropy will be generated per unit of mass while the turbine is running?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?

Answers: 3

Answer

Engineering, 04.07.2019 19:10

A)-in the process of engineering design, explain the contribution of material selection. b)- explain the procedure of synthesis as is employed in engineering design. c)- is there any relationship between ergonomics and engineering design? explain. d)- safety consideration in engineering design includes human, product and the enviroment . explain how safety will be incorporated into the design?

Answers: 3

Answer

You know the right answer?

Air enters an adiabatic turbine at 2.8 mpa and 400 °c and expands to a lower pressure of 150 kpa. as...

Questions